China manufacturer Ta Shaft Mounted Gearbox for Sale in Hot with Hot selling

Product Description

Product Description

ATA Series Shaft mounted Gearbox Reducer      SMR Series Shaft mounted Gearbox Reducer

ATA series shaft mounted gearbox(speed reducer) with helical hardened gears has the characteristics of high carrying capacity, smooth transmission, light weight, low energy consumption and so on. Input shaft of ATA speed reducer is connected with gear motor by belt pulley, hollow output shaft is linked with a key. It can be replaced by electric drum as power for belt conveyors and lifting equipments. ATA series shaft mounted gearbox could be attached with back-stop to avoid the working machine back skating, and conveniently mounted by tie rod. ATA series shaft mounted speed reducer is widely applied in the mining equipments, concrete mixing batching plant, stone crushers, sand making production line and other belt conveyors, mechanical transmission areas.

Mechanical belt conveyors drive system is composed of ATA shaft mounted speed reducer, torque arm, pulleys and gear motors, whose power transmission from the gear motor to the gearbox through the pulley, and then speed reducer passed to the drive pulley through the hollow output shaft and the gearbox is fixed by torque arm, anti-slip device can be configured. The system is convenient to install,use and maintain.

Features
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select 3 hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.

Application

Stone crushers plant , Cement plant, Concrete batch mixing plant, Mining conveyors, Port transfer

conveyor, Crushing machine, etc ···

 

Characteristic

1) All gears are heat treated and fixed to achieve low noise and high output
2) Mounting dimensions are interchangeable with Fenner

Product Parameters

 TA Shaft Mounted Reducer Output Shaft Bore  [mm] Ratio(i) Rated torque
TA30 Φ30 7, 10, 12.5 180N.m
TA35 Φ35 5,10,15,20,25 420N.m
TA40 Φ40 5,10,12.5,15,20,25 900N.m
Φ45
TA45 Φ45 5,10,12.5,15,20,25 1400N.m
Φ50
Φ55
TA50 Φ50 5,10,12.5,15,20,25 2300N.m
Φ55
Φ60
TA60 Φ60 5,10,12.5,15,20,25 3600N.m
Φ70
TA70 Φ70 5,10,12.5,15,20,25,31 5100N.m
Φ85
TA80 Φ80 5,10,12.5,15,20,25,31 7000N.m
Φ100
TA100 Φ100 5,10,12.5,15,20,25,31 11000N.m

 

SMR 
Model No.
Output Shaft Bore
[mm]
 
Ratio(i)
Standard Alternative 5:1
13:1
20:1
B Φ30 Φ40
C Φ40 Φ50
D Φ50 Φ55
E Φ55 Φ65
F Φ65 Φ75
G Φ75 Φ85
H Φ85 Φ100
J Φ100 Φ120

 

Production Process

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industry
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Soft Tooth Surface
Installation: Torque Arm Type
Step: Stepless
Customization:
Available

|

Customized Request

cycloidal gearbox

Distinguishing Features of Cycloidal Gearboxes

Cycloidal gearboxes, also known as cycloidal drives or cycloidal reducers, possess distinct characteristics that set them apart from other types of gearboxes:

  • Principle of Operation: Cycloidal gearboxes utilize the principle of cycloidal motion, where input shaft movement is transformed into eccentric motion of the cycloidal disc. This unique mechanism results in smooth and consistent output motion.
  • Compactness: Cycloidal gearboxes are renowned for their compact size and high torque density. The concentric design of the components contributes to their ability to transmit substantial torque in a relatively small package.
  • Tooth Profile: Cycloidal gearboxes employ specialized cycloidal teeth, which involve both pinwheel and roller gears. This distinctive tooth profile contributes to the characteristic smooth and vibration-free operation.
  • Reduction Mechanism: They often employ multi-lobed cam gears that interact with the pins on the cycloidal disc, resulting in multiple gear engagements per revolution and improved load distribution.
  • Motion Control: Cycloidal gearboxes offer high positional accuracy and motion control due to the eccentric motion of the disc, making them suitable for robotics, automation, and precision applications.
  • Backlash: They typically exhibit low backlash due to the nature of the engagement mechanism, making them advantageous for applications requiring precise and reversible motion.
  • Applications: Cycloidal gearboxes are commonly used in various industries, including robotics, packaging, material handling, printing, and more, where their compactness, precision, and efficiency are valued.

These distinguishing features contribute to the unique capabilities and benefits of cycloidal gearboxes in specific applications.

cycloidal gearbox

Assembling and Disassembling a Cycloidal Gearbox

Assembling and disassembling a cycloidal gearbox requires careful attention to detail and precision. The process can vary depending on the specific design of the gearbox, but the general steps involve:

  1. Preparation: Gather all the necessary tools, components, and safety equipment for the assembly or disassembly process. Ensure a clean and organized workspace.
  2. Disassembly: To disassemble a cycloidal gearbox, follow these steps:
    • Remove any external components or covers to access the gearbox internals.
    • Identify and mark the positions of all components for reassembly.
    • Release any locking mechanisms or fasteners that hold the gearbox components together.
    • Remove each component carefully, starting from the outermost layers and moving inward.
  3. Cleaning and Inspection: Clean all components thoroughly using appropriate cleaning agents. Inspect each part for wear, damage, or any signs of degradation. Replace any components that are worn out or damaged.
  4. Reassembly: To assemble the cycloidal gearbox, follow these steps:
    • Begin by assembling the internal components in the reverse order of disassembly.
    • Apply lubrication to the gears and other moving parts as recommended by the manufacturer.
    • Follow the markings made during disassembly to ensure correct positioning and alignment of components.
    • Gradually secure each component with the appropriate fasteners, ensuring proper torque settings.
    • Reattach any external covers or components that were removed earlier.
  5. Testing: After reassembly, perform functional tests to ensure that the gearbox operates smoothly and without any issues. Check for any abnormal noises, vibrations, or irregular movements.
  6. Final Checks: Double-check all fasteners, connections, and alignments. Verify that the gearbox functions as intended and meets performance specifications.
  7. Documentation: Keep detailed records of the assembly process, including torque settings, markings, and any adjustments made during reassembly. This documentation will be useful for future maintenance or repairs.

It’s important to note that cycloidal gearboxes can have complex designs, and the exact procedure for assembly and disassembly may vary. Always refer to the manufacturer’s documentation and guidelines for specific instructions related to your gearbox model.

cycloidal gearbox

How Does a Cycloidal Gearbox Work?

A cycloidal gearbox operates on the principle of cycloidal motion to transmit rotational power. It consists of a set of components that work together to achieve smooth and efficient motion transmission:

  1. High-Speed Input Shaft: The gearbox is connected to a high-speed input shaft, typically driven by an electric motor or another power source.
  2. Cycloidal Pins or Rollers: Surrounding the input shaft are a series of cycloidal pins or rollers arranged in a circular pattern. These pins interact with the lobed profiles of the outer stationary ring.
  3. Outer Stationary Ring: The outer ring remains stationary and contains lobed profiles. The lobes are designed in a way that allows them to engage with the cycloidal pins as they rotate.
  4. Motion Transmission: As the input shaft rotates, it causes the cycloidal pins to move along the circular path. The interaction between the cycloidal pins and the lobed profiles of the outer ring results in a unique motion known as epicycloidal or hypocycloidal motion.

This motion generates torque that is transferred from the input shaft to the output shaft of the gearbox. The main advantage of a cycloidal gearbox is its ability to provide high torque output in a compact design. The multiple points of contact between the pins and the lobes distribute the load, enhancing the gearbox’s load-carrying capacity.

Cycloidal gearboxes are known for their smooth and controlled motion, making them suitable for applications requiring precise positioning and high torque capabilities, such as robotics, automation, and industrial machinery.

China manufacturer Ta Shaft Mounted Gearbox for Sale in Hot   with Hot selling		China manufacturer Ta Shaft Mounted Gearbox for Sale in Hot   with Hot selling
editor by CX 2024-04-09