Tag Archives: tractor china

China wholesaler Gearbox with Auxiliary Transmission and Transfer Case Assembly for Tractor Dump Truck 4X4 4WD with Great quality

Product Description

Product Description

Gearbox with Auxiliary Transmission and Transfer Case Assembly
for Tractor Truck 4WD  4X4 

 

Company Profile

 

Our Advantages

 

Certifications

 

Exhibition

 

 

 

Packaging & Shipping

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Torque Arm Type
Step: Four-Step
Samples:
US$ 800/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

helical gearbox

How to Calculate Transmission Ratio for a Cycloidal Gearbox

Using a cycloidal gearbox can be very useful in a wide variety of situations. However, it’s important to understand how to use it properly before implementing it. This article discusses the benefits of using a cycloidal gearbox, how to calculate the transmission ratio, and how to determine the effects of dynamic and inertial forces on the gearbox.

Dynamic and inertial effects

Various studies have been done to study the dynamic and inertial effects of cycloidal gearboxes. These studies have been performed using numerical, analytical and experimental methods. Depending on the nature of the load and its distribution along the gear, a variety of models have been developed. These models use finite element method to determine accurate contact stresses. Some of these models have been developed to address the nonlinear elasticity of contacts.
Inertial imbalance in a cycloidal gearbox causes vibration and can affect the efficiency of the device. This can increase mechanical losses and increase wear and tear. The efficiency of the device also depends on the torque applied to the cycloidal disk. The effectiveness of the device increases as the load increases. Similarly, the nonlinear contact dynamics are also associated with an increase in efficiency.
A new model of a cycloidal reducer has been developed to predict the effects of several operational conditions. The model is based on rigid body dynamics and uses a non-linear stiffness coefficient. The model has been validated through numerical and analytical methods. The model offers drastic reduction in computational costs. The model allows for a quick analysis of several operational conditions.
The main contribution of the paper is the investigation of the load distribution on the cycloidal disc. The study of this aspect is important because it allows for an analysis of the rotating parts and stresses. It also provides an indication of which gear profiles are best suited for optimizing torque transmission. The study has been conducted with a variety of cycloidal gearboxes and is useful in determining the performance of different types of cycloidal gearboxes.
To study the load distribution on the cycloidal disc, the authors investigated the relationship between contact force, cycloidal gearboxes and different gear profiles. They found that the non-linear contact dynamics have a large impact on the efficiency of a cycloidal gearbox. The cycloidal gearbox is an ideal solution for applications that involve highly dynamic servos. It can also be used in machine tool applications and food processing industries.
The study found that there are three common design principles of cycloidal reducers. These are the contact force distribution, the speed reduction and the trochoidal profile of the cycloidal disc. The trochoidal profile has to be defined carefully to ensure correct mating of the rotating parts. The trochoidal profile provides an indication of which gear profiles are best for optimizing torque transmission. The contact force distribution can be improved by refining the mesh along the disc’s width.
As the input speed increases, the efficiency of the reducer increases. This is because contact forces are constantly changing in magnitude and orientation. A cycloidal reducer with a one tooth difference can reduce input speed by up to 87:1 in a single stage. It also has the ability to handle high-cycle moves without backlash.helical gearbox

Transmission ratio calculation

Getting the correct transmission ratio calculation for a cycloidal gearbox requires a good understanding of what a gearbox is, as well as the product that it is being used for. The correct ratio is calculated by dividing the output speed of the output gear by the input speed of the input gear. This is usually accomplished by using a stopwatch. In some cases, a catalog or product specification may be required. The correct ratio is determined by a combination of factors, such as the amount of torque applied to the mechanism, as well as the size of the gears involved.
A cycloidal gear is a type of gear tooth profile that can be represented using a spline. It is also possible to model a gear with a cycloidal profile by using a spline to connect points against the beginning of a coordinate system. This is important in the design and functionality of a gear.
There are many different gears used in machines and devices. These include the herringbone gear, the helical gear and the spiral bevel gear. The best transmission ratios are typically obtained with a cycloidal gearbox. In addition to ensuring the accuracy of positioning, a cycloidal gearbox provides excellent backlash. Cycloid gears have a high degree of mechanical efficiency, low friction, and minimal moment of inertia.
A cycloidal gearbox is often referred to as a planetary gearbox, though it is technically a single-stage gearbox. In addition to having a ring gear, the gearbox has an eccentric bearing that drives the cycloidal disc in an eccentric rotation. This makes the cycloidal gearbox a good choice for high gear ratios in compact designs.
The cycloid disc is the key element of a cycloidal gearbox. The cycloid disc has n=9 lobes, and each lobe of the disc moves by a lobe for every revolution of the drive shaft. The cycloid disc is then geared to a stationary ring gear. The cycloidal disc’s lobes act like teeth on the stationary ring gear.
There are many different gears that are classified by the profile of the gear teeth. The most common gears are the involute and helical gears. Most motion control gears include spur designs. However, there are many other types of gears that are used in various applications. The cycloidal gear is one of the more complicated gears to design. The cycloid disc’s outline can be represented using markers or smooth lines, though a scatter chart will also do.
The cycloid disc’s lobes rotate on a reference pitch circle of pins. These pins rotate 40 deg during the eccentric rotation of the drive shaft. The pins rotate around the disc to achieve a steady rotation of the output shaft.
The cycloid disc’s other obvious, and possibly more important, feature is the’magic’ number of pins. This is the number of pins that protrude through the face of the disc. The disc has holes that are larger than the pins. This allows the pins to protrude through the disc and attach to the output shaft.helical gearbox

Application

Whether you’re building a robot drive or you’re simply looking for a gearbox to reduce the speed of your vehicle, a cycloidal gearbox is a great way to achieve a high reduction ratio. Cycloidal gearboxes are a low-friction, lightweight design that has an extremely stable transmission. They are suitable for industrial robots and can be used in many applications, including positioning robots.
Cycloidal gearboxes reduce speed by using eccentric motion. The eccentric motion enables the entire internal gear to rotate in wobbly cycloidal motion, which is then translated back into circular rotation. This eliminates the need for stacking gear stages. Cycloidal gearboxes also have less friction, higher strength, and greater durability than conventional gearboxes.
The cycloidal gearbox is also used in a number of applications, including marine propulsion systems, and robot drives. Cycloidal gearboxes reduce vibration by using offset gearing to cancel out vibrations.
Cycloidal gears have lower friction, higher strength, and better torsional stiffness than involute gears. They also have a reduced Hertzian contact stress, making them better than involute gears for use with shock loads. They also have a smaller size and weight than conventional gearboxes, and they have a higher reduction ratio than involute gears.
Cycloidal gears are typically used to reduce the speed of motors, but they also offer a number of other advantages. Cycloidal gearboxes have a smaller footprint than other gearboxes, allowing them to fit into confined spaces. They also have low backlash, allowing for precise movement. Cycloidal gears have a higher efficiency, resulting in lower power requirements and lower wear.
The cycloidal disc is one of the most important components of the gearbox. Cycloidal discs are normally designed with a short cycloid, which minimizes the eccentricity of the disc. They are also designed with a shortened flank, resulting in better strength and less stress concentration. Cycloidal discs are typically geared to a stationary ring gear. The cycloid is designed to roll around the stationary ring pins, which push against the circular holes in the disc. Cycloidal gearboxes typically employ two degrees of shift.
Cycloidal drives are ideal for heavy load applications. They also have high torsional stiffness, which makes them highly resistant to shock loads. Cycloidal drives also offer a high reduction ratio, which can be achieved without the need for a large input shaft. They are also compact and have a high service life.
The output shaft of a cycloidal gearbox always has two degrees of shifting, which ensures that the input and output shafts always rotate at a different speed. The output shaft would be a pin casing around the drive disks, which would also allow for easy maintenance.
Cycloidal gearboxes are also very compact and lightweight, so they are ideal for use in industrial robots. The cycloidal gearbox reducer is the most stable, low-vibration reducer in industrial robots, and it has a wide transmission ratio range.
China wholesaler Gearbox with Auxiliary Transmission and Transfer Case Assembly for Tractor Dump Truck 4X4 4WD   with Great quality China wholesaler Gearbox with Auxiliary Transmission and Transfer Case Assembly for Tractor Dump Truck 4X4 4WD   with Great quality
editor by CX 2023-04-26

China High Quality Gearbox for Tractor Pto manufacturer

Merchandise Description

OEM customized gearbox for agricultural equipment

1. Solution Description

 

MODEL
 
INPUT Knowledge OUTPUT Data
Ratio Optimum Rpm KW HP-CV N.M N.M R.P.M
AC78845A/B one:1.ninety three 800 thirty 40 358 185 1544
RC 1:1.ninety three 800 thirty forty 358 185 1544
RC5/BB60X 1:1.69 800 37 fifty 440 260 1352
AC78846A/B 1:1.ninety three 540 fifty five seventy five 972 504 1042
612619 one:1.93 540 74 one hundred 1308 678 1042
612666 1:1.46 540 seventy four a hundred 1308 896 680
BB84X 1:1.26 540 sixty seven ninety 1184 940 680
RC81-000-01 one:1.923 540 74 100 1308 680 1038
RC81-000-02 one:1.forty six 540 seventy four a hundred 1308 896 788
75356-192 1:1.92 540 ninety seven a hundred thirty 1715 893 1037
75356-146 one:1.forty six 540 97 one hundred thirty 1715 1175 788
74823-19 one:1.87 540 ninety seven one hundred thirty 1715 918 1009
74823-14 one:1.39 540 ninety seven a hundred thirty 1715 1235 750
GT40U.B 3:1 540 44 60 778 2334 180
SF-100 one:1 540 15 twenty 265 265 540
MCT-100A1 seven.5:1 540 29.five forty 521 3912 seventy two
MCT-100A2 22.5:1 540 29.5 forty 521 11738 24
DCR1-0000 2.4:one 540 37 fifty 654 1570 225

two. More Goods

3. The Drawing Of Equipment Box

four. Creation and  Packing 

five.Shipping and delivery

6.Our Organization

HangZhou CZPT Tech.Equipment Co.,Ltd was  founded in 2003. It is situated at  HangZhou County, HangZhou Metropolis, shut to 204 National Highway.Our main products: 1. all  types of  drive shaft 2.all sorts of gera box 3. Farm equipment: IMT500  inorganic  fertilizer spreader,  HMT05S  organic fertilizer  spreader,  3M rotovator , 3M damp-paddy subject rotary, King 185 deep cultviating  machine and so on. 4.The machinery parts: several sorts of Gear, Shaft, Flang, ,Gear box, Laser elements, Stamping components and so on.
   

seven. FAQ

1. Q: Are your products cast or cast?

    A: All of our items are forged.

two. Q: What is actually your MOQ?
    A: twenty PCS for each sort. We accept the sample buy. 
3. Q: What is the horse electrical power of the pto shaft are obtainable? 
    A: We supply a total range of pto shaft, ranging from 16HP-200HP.
4. Q: How several splined specification do you have ?
    A: We produce 1 1/8″-Z6, 1 3/8″-Z6, 1 3/4″-Z6, 1 3/8″- Z21, 1 3/4″-Z20, 8X42X48X8 and 8X32X38X6 splines.
five. Q: How about the guarantee?
    A: We promise 1 calendar year guarantee. With high quality problems, we will send you the new merchandise for free of charge within following cargo.
six. Q: What is actually your payment phrases?
    A: T/T, L/C, D/A, D/P….
7. Q: What is the supply time?
    A: 40 days soon after getting your superior deposit.

 

US $50-110
/ Piece
|
30 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Customization:

###

MODEL
 
INPUT DATA OUTPUT DATA
Ratio Maximum Rpm KW HP-CV N.M N.M R.P.M
AC78845A/B 1:1.93 800 30 40 358 185 1544
RC 1:1.93 800 30 40 358 185 1544
RC5/BB60X 1:1.69 800 37 50 440 260 1352
AC78846A/B 1:1.93 540 55 75 972 504 1042
612619 1:1.93 540 74 100 1308 678 1042
612666 1:1.46 540 74 100 1308 896 680
BB84X 1:1.26 540 67 90 1184 940 680
RC81-000-01 1:1.923 540 74 100 1308 680 1038
RC81-000-02 1:1.46 540 74 100 1308 896 788
75356-192 1:1.92 540 97 130 1715 893 1037
75356-146 1:1.46 540 97 130 1715 1175 788
74823-19 1:1.87 540 97 130 1715 918 1009
74823-14 1:1.39 540 97 130 1715 1235 750
GT40U.B 3:1 540 44 60 778 2334 180
SF-100 1:1 540 15 20 265 265 540
MCT-100A1 7.5:1 540 29.5 40 521 3912 72
MCT-100A2 22.5:1 540 29.5 40 521 11738 24
DCR1-0000 2.4:1 540 37 50 654 1570 225
US $50-110
/ Piece
|
30 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Four-Step

###

Customization:

###

MODEL
 
INPUT DATA OUTPUT DATA
Ratio Maximum Rpm KW HP-CV N.M N.M R.P.M
AC78845A/B 1:1.93 800 30 40 358 185 1544
RC 1:1.93 800 30 40 358 185 1544
RC5/BB60X 1:1.69 800 37 50 440 260 1352
AC78846A/B 1:1.93 540 55 75 972 504 1042
612619 1:1.93 540 74 100 1308 678 1042
612666 1:1.46 540 74 100 1308 896 680
BB84X 1:1.26 540 67 90 1184 940 680
RC81-000-01 1:1.923 540 74 100 1308 680 1038
RC81-000-02 1:1.46 540 74 100 1308 896 788
75356-192 1:1.92 540 97 130 1715 893 1037
75356-146 1:1.46 540 97 130 1715 1175 788
74823-19 1:1.87 540 97 130 1715 918 1009
74823-14 1:1.39 540 97 130 1715 1235 750
GT40U.B 3:1 540 44 60 778 2334 180
SF-100 1:1 540 15 20 265 265 540
MCT-100A1 7.5:1 540 29.5 40 521 3912 72
MCT-100A2 22.5:1 540 29.5 40 521 11738 24
DCR1-0000 2.4:1 540 37 50 654 1570 225

How to Use a Cyclone Gearbox

Often, a cycloidal gearbox is used in order to achieve a torque transfer from a motor or pump. This type of gearbox is often a common choice as it has a number of advantages over a regular gearbox. Its main advantage is that it is easy to make, which means that it can be incorporated into a variety of applications. However, if you want to use a cycloidal gearbox, there are a few things that you need to know. These include the operation principle, the structure and the dynamic and inertial effects that come with it.helical gearbox

Dynamic and inertial effects

Several studies have been carried out on the static and dynamic properties of cycloidal gears. The study of these effects is beneficial in assisting optimal design of cycloidal speed reducers.
In this paper, the dynamic and inertial effects of a two-stage cycloidal speed reducer have been investigated using the CZPT program package. Moreover, a new model for cycloidal reducers based on non-linear contact dynamics has been developed. The new model aims to predict several operational conditions.
The normal excitation contact force for the cycloid discs of the first and second stage is very similar. However, the total deformation at the contact point is different. This effect is mainly due to the system’s own oscillations. The cycloid discs of the second stage turn around the ring gear roller with a 180deg angle. This angle is a significant contributor to the torque loads. The total excitation force on the cycloid discs of first and second stage is 1848 N and 2068.7 N, respectively.
In order to analyze the contact stress, different gear profiles were investigated. The mesh density was considered as an important design criterion. It was found that a bigger hole reduces the material content of the cycloidal disc and results in more stresses.
Moreover, it is possible to reduce the contact forces in a more efficient manner by changing the geometric parameters. This can be done by mesh refinement along the disc width. The cycloidal disc has the greatest influence on the output results.
The efficiency of a cycloidal drive increases with the increase in load. The efficiency of a cycloidal reducer also depends on the eccentricity of the input shaft and the cycloidal plate. The efficiency curve for small loads is linear. However, for the larger loads, the efficiency curve becomes more non-linear. This is because the stiffness of the cycloid reducer increases as the load increases.

Structure

Despite the fact that it looks like a complicated engineering puzzle, the construction of a cycloidal gearbox is actually quite simple. The key elements are the base, the load plate and the thrust bearing. All these elements work together to create a stable, compact gearbox.
The base is a circular section with several cylindrical pins around its outer edge. The pins are fixed on a fixed ring that holds them in a circular path. The ring serves as a reference circle. The circle’s size is approximately 5mm in diameter.
The load plate is a series of threaded screw holes. These are arranged 15mm away from the center. These are used to anchor external structures. The load plate must be rotated around the X and Y axis.
The thrust bearing is placed on top of the load plate. The bearing is made of an internal diameter of 35mm and an external diameter of 52mm. It is used to allow rotation around the Z axis.
The cycloidal disc is the centerpiece of the cycloidal gearbox. The disc has holes for the pins that drive the output shaft. The holes are larger than those used in output roller pins. The disc also has a reduced eccentricity.
The pins are attached to the cycloidal disc by rolling pins. The pins are made of a material that provides mechanical support for the drive during high-torque situations. The pins have a 9mm external diameter. The disc has a number of lobes and is rotated by one lobe per shaft revolution.
The cycloidal gearbox also has a top cover that helps keep the components together. The cover has a pocket for tools. The top cover also has threads that screw into the casing.helical gearbox

Operation principle

Among many types of gear transmissions, cycloidal gearboxes are used in heavy machinery and multi-axis robots. They are highly effective, compact and capable of high ratios. In addition, they have an overload capability.
Cycloid disks are driven by eccentric shafts that rotate around fixed ring pins. Roller pins of the pin disc engage with holes in the cycloidal disc. These roller pins drive the pin disc and the pin disc transfers the motion to the output shaft.
Unlike conventional gear drives, cycloidal drives have low backlash and high torsional stiffness. They are ideally suited to heavy loads and all drive technologies. The lower mass and compact design of the cycloidal disk also contributes to its high efficiency and positioning accuracy.
The cycloidal disc plays a central role in the gearbox kinematics. It rotates around a fixed ring in a circle. When the disc is pushed against the ring gear, the pins engage with the disc and the roller pins rotate around the pins. This rotating motion generates vibration, which travels through the driven shafts.
Cycloid discs are typically designed with a short cycloid, so that the eccentricity is minimized. This reduces unbalance forces at high speeds. Ideally, the number of lobes on the cycloid is smaller than the number of surrounding pins. This reduces the amount of Hertzian contact stress.
Unlike planetary gears, cycloidal gears have high accuracy and are capable of withstanding shock loads. They also experience low friction and less wear on tooth flanks. They also have higher efficiency and load capacity.
Cycloid gears are generally more difficult to manufacture than involute gears. Cycloid gears are not suitable for stacking gear stages. They require extreme accuracy for manufacturing. However, their smaller size and low backlash, high torsional stiffness, and low vibration make them ideal for use in heavy machines.

Involute gear tooth profile

Almost all gears are manufactured with an involute gear tooth profile. Cycloid gears are also produced with this profile. Compared with involute gears, cycloid gears are stronger and can transmit more power. However, they can also be more difficult to manufacture. This makes them costlier.
The involute gear tooth profile is a smooth curve. It is derived from the involute curve of a circle. A tangent to the base circle is the normal at any point of an involute.
This curve has properties that allow the involute gear teeth to transfer motion in perpendicular direction. It is also the path traced by the end of the string unwrapping from a cylinder.
An involute profile has the advantage of being easy to manufacture. It also allows for smooth meshing despite misalignment of the centre distance. This profile is also preferred over a cycloid tooth profile, but it is not the best in every regard.
Cycloid gear teeth are also made of two curves. Unlike involute teeth, cycloid gear teeth have a consistent radius. Cycloid gears are less likely to produce noise. But they are also more expensive to manufacture.
Involute teeth are easier to manufacture because they have only one curve. Cycloid gears can also be made with a rack type cutter. This makes them cheaper to manufacture. However, they require an expert design. They can also be manufactured with a gear shaper that includes a pinion cutter.
The tooth profiles that satisfy the law of gear-tooth action are sometimes called conjugate profiles. The involute profile is the most common of these. It allows for constant torque transmission.helical gearbox

Backlash

Typically, cycloidal drives provide a high ratio of transmission with no backlash. This is because the cycloid disc is driven by an eccentric shaft. During rotation, the cycloid disc rotates around a fixed ring. This ring also rotates independently of the center of gravity.
The cycloid disc is typically shortened to reduce the eccentricity. This helps to minimize the unbalance forces that may occur at high speeds. The cycloid also offers a larger gear ratio than traditional gears. This provides a better positional accuracy.
Cycloid drives also have a high torsional stiffness. This provides greater torsional resilience and shock load capabilities. This is important for a number of reasons, such as in heavy-duty applications.
Cycloid drives also have lower mass. These benefits make them ideally suited for all drive technologies. The design also allows for higher torsional stiffness and service life. These drives also have a much smaller profile.
Cycloid drives are also used to reduce speed. Because of the high torsional stiffness of the cycloid, they also have high positioning accuracy.
Cycloid drives are well-suited to a variety of applications, including electric motors, generators, and pump motors. They are also highly resistant to shock loads, which is important in a variety of applications. This design is ideal for applications that require a large transmission ratio in a compact design.
Cycloid drives also have the advantage of minimizing the clearance between the mating components. This helps to eliminate interference and ensure a positive fit. This is particularly important in gearboxes. It also allows for the use of a load cell and potentiometer to determine the backlash of the gearbox.
China High Quality Gearbox for Tractor Pto     manufacturer China High Quality Gearbox for Tractor Pto     manufacturer
editor by czh 2023-01-21

in Maturin Venezuela (Bolivarian Republic of) sales price shop near me near me shop factory supplier XCMG Official Track Dozer Bulldozer 320HP RC Compact Bull Dozer Ty320 China Crawler Dozer Tractor for Sale manufacturer best Cost Custom Cheap wholesaler

  in Maturin Venezuela (Bolivarian Republic of)  sales   price   shop   near me   near me shop   factory   supplier XCMG Official Track Dozer Bulldozer 320HP RC Compact Bull Dozer Ty320 China Crawler Dozer Tractor for Sale manufacturer   best   Cost   Custom   Cheap   wholesaler

With EPG model registered in far more than 70 nations like America , Europe , Japan and so on, it has companions among world prime enterprises, this kind of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so forth. we are assured to supply our buyers versatile and diversified companies. EPG has set up a full established of quality administration system which is offered with advanced inspection and test products.
EPT Formal Keep track of Dozer Bulldozer 320HP RC Compact Bull Dozer Ty320 EPTT Crawler Dozer Tractor.

* The high dependability EPTT shift EPTT, the steady EPT torque converter, and two-phase spur EPT last EPT attribute higher EPTT EPTT effectiveness.

* The motor can operate normally and reliably unEPTTall load problems and all sizzling environments needed by the consumer, with no overheating.

* It can recognize the automated analysis and EPTT-method monitoring of the malfunctions. The integrally EPT molded instrument panel integrates the A/C, electrical devices, and devices, featuring beautiful visual appeal and high grade.

* The full box-variety main frame with application of high performance resources and higher toughness castings features high carrying potential towards influence load and bendingmoment and the high quality welds promise the existence cycle of the principal body.

[Parameter]

Motor Model EPTT NTA855-C360
Type Turbocharged,aftercooled,Four Stroke
Rated EPTT (kW) 345HP (257KW)
Rated velocity (r/min) 2000
Starting strategy Electrical commencing 24V 11kW
Battery 24V(12Vx2)
Min gasoline consumption ratio(min) 207
EPT technique of operate gear Operating strain (Mpa) 14
Rated flow (L/min) (1795r/min) 360
Track Track pitch (mm) 228.six
Track width (mm) 560
No. of observe shoes(every aspect) 41
Duration of track on ground (mm) 3150
Keep track of gauge (mm) 2140

FAQ

one: What type phrases of payment can be acknowledged?
A: For terms of payment, L/C, T/T, D/A, D/P, Western EPT (can be) could accepted

2: What certificates are obtainable in EPTTry?
A: For the certification, we have CE, ISO, Gost, EPTA(United states)CCC,

3: What about the delivery time?
A: 30 daEPTTafter getting the deposit.

4: What about the warranty time?
A: 12 months soon after shipment or 2000 functioning hours, whichever occuts very first.

5. What about the Least OrEPTTEPTtity?
A: The MOQ is one pcs.

  in Maturin Venezuela (Bolivarian Republic of)  sales   price   shop   near me   near me shop   factory   supplier XCMG Official Track Dozer Bulldozer 320HP RC Compact Bull Dozer Ty320 China Crawler Dozer Tractor for Sale manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Maturin Venezuela (Bolivarian Republic of)  sales   price   shop   near me   near me shop   factory   supplier XCMG Official Track Dozer Bulldozer 320HP RC Compact Bull Dozer Ty320 China Crawler Dozer Tractor for Sale manufacturer   best   Cost   Custom   Cheap   wholesaler

in Abuja Nigeria sales price shop near me near me shop factory supplier China Cheap 4WD Tractor 25HP 25HP 30HP for Sale manufacturer best Cost Custom Cheap wholesaler

  in Abuja Nigeria  sales   price   shop   near me   near me shop   factory   supplier China Cheap 4WD Tractor 25HP 25HP 30HP for Sale manufacturer   best   Cost   Custom   Cheap   wholesaler

EPG has been efficiently accredited by ISO9002 Quality Management System, ISO9001 Good quality Administration Technique, API certification, ISO/TS16949:2002 and ISO10012 measurement management program. Owing to our sincerity in providing very best provider to our consumers, comprehending of your requirements and overriding perception of responsibility towards filling purchasing requirements, In 2008, it was awarded with “Nationwide Export Commodity Inspection-totally free Business”.

Employed TRACTOR

KUBOTA , FOTON , YTO , EPTTMA , DF , SF , WUZHENG , TS , SHXiHu (West Lake) Dis.HU (WEST LAKE) DIS.O , JOHN DEERE , NEW HOLLAN , Word,EPTT

Item: We can offer large top quality products with competitive cost.

Generation Capacity: we have sufficient tractor stock and can start to pack at once when you validate your get.
Easy, resilient and productive tractors can support you to enhance your agricultural revenue.

Employed tractors are in low cost and higher high quality, very good functioning condition, is your first choose.

XiHu (West Lake) Dis.hu (West Lake) Dis.nized layout and superb production EPTT deliver handy procedure and cozy driving expertise. In the training course of use, you will expertise a lot of unimaginable benefits, permitting you to enEPTT driving enjoyment while operating efficiently, and at the very same time carry you higher economic advantages.

Performance MaXiHu (West Lake) Dis.mum motor EPTT at 2500 rpm 75hp*/din
MaXiHu (West Lake) Dis.mum torque at 1500 rpm (22.seven kgm)
Motor Make/Sort: Fiat 8045.06
No. of cyliners: three
Cooling: H2o
Air Cleaner Variety: Oil Bath
CLUTCH Type: Dual Plate
EPTT Variety: EPTT with continuous-mesh EPTTs.
No. of EPTTs: eight EPTT, 2 Reverse
EPTT Consider OFF Entirely unbiased 540 PTO rpm 1,967 motor rpm
EPTTS Max. Elevate ability 1650 kg
Reduced Links three-point linkage Cat one-two Handbook response management.
STEERING Steering: Hydro assisted, EPTT steering.
Brake Sort: Dry, EPTT-variety, with mechanical manage.
Front Axle: Telescopic type, inverted U, variable tread
INSTRUMENTATION Gauges EPTTchometer, Hour meter, Gasoline Level amp h2o Temperature
TYRE Front 6.00-16, seven.50-sixteen
Rear fourteen.9/ 13-thirty, 16.nine/fourteen-thirty,13.6/12-36.
WEIGEPTT Proportions Gross Excess weight two,070 kg
Above all Size three.542 mm
General Width minimum three,200mm

Noted:This parameters are for reference only,distinct variety different data, particular data remember to contact us.

Business info

Certifications

Our workshop

Our customers

EPTT and transport

FAQ

Q1. What are your phrases of EPTT?
A: EPTTly, we pack our goods in the wood frame into 2 stages to maXiHu (West Lake) Dis.mize area

Q2. What are your phrases of payment?
A: T/T 100% as the deposit for 1-two device and fifty/50 for the EPTTsale. We’ll display you the photos of the goods and deals just before you pay out the harmony.

Q3. What are your phrases of shipping?
A: FOB, CIF, CNF

This autumn. How about your delivery time?
A: EPTTly, it will get thirty to 60 daEPTTafter obtaining your EPTT payment. The particular shipping and delivery time depends
on the things and the amount of your order.

Q5. Do you take a look at all your products ahead of supply?
A: Of course, we examination almost everything carefully a hundred% prior to loading

Q6: How do you make our organization EPTT-expression and a good partnership?
A:one. We keep very good quality and competitive price tag to make certain our customers advantage
2. We regard each client as our good friend and we sincerely do company and make pals with them,
no subject the place they occur from.

  in Abuja Nigeria  sales   price   shop   near me   near me shop   factory   supplier China Cheap 4WD Tractor 25HP 25HP 30HP for Sale manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Abuja Nigeria  sales   price   shop   near me   near me shop   factory   supplier China Cheap 4WD Tractor 25HP 25HP 30HP for Sale manufacturer   best   Cost   Custom   Cheap   wholesaler

China manufacturer & factory supplier for Agricultural in Thrissur India machine parts 4ft 5ft 6ft 7ft 3 Point Heavy Disc Plow Tractor Plough With high quality best price & service

Our business has strong financial strength, builds up a technician crew contingent with substantial top quality, possesses the creation assembly line of technicalization in China and excellent method checking on merchandise high quality and operates marketing and advertising networks all through the region.

China manufacturer & manufacturing unit provider for Agricultural  in Thrissur India  device areas 4ft 5ft 6ft  7ft 3 Point Hefty Disc Plow Tractor Plough With large quality ideal cost & service

Maker of standard and custom roller chains. Suited for ageing, anxiety relieving, warmth dealing with and powder coating purposes. Aerospace, automotive, armed forces, power, composite, pharmaceutical and different other industries served. Turnkey programs integration and most products available in inventory.Innovative thermo tHow Can You Be Risk-free When Employing PTO Shafts? First, make positive the shaft is shielded. This involves the driveline defend that handles the employ driveline, and the grasp shield which addresses the common joint and PTO stub shaft on the tractor.Maintain the shield so it can function for you. PTO driveline shields are normally mounted on bearings, so they require to be preserved. always REPLACE the defend when it is ruined or missing.Up coming, hold a secure length from it when in use. Maintain other people away, also. How far? A length of 2 times your top is a very good begin.Allow only people who absolutely have to be in the spot to be there. Maintain all kids absent!Always shell out focus to what is occurring. Most PTO victims were caught by shock.If some thing goes improper — quit the machinery get the PTO out of equipment, cease the engine and established the brake. Place the keys in your pocket just before doing work on the equipment.When halting the equipment for any purpose — finish of function, lunch, repairs, or interaction — consider the PTO out of equipment, end the engine and established the brake.Road planers, dredges, and other products require energy from some kind of engine in buy to perform their developed purpose. Without a electricity get off, it would be necessary to add a 2nd motor to provide the electrical power necessary to run hydraulic pumps and other driveline attached equipment.reatment products, such as community heat treatment oven, multi-use thermo therapy oven, and so forth.

Overview

Quick Specifics

Situation:

New

Sort:

Farm Cultivator

Certification:

CE

Warranty:

one 12 months

After-revenue Provider Provided:

Online assist

Use:

farm products

Area of Origin:Zhejiang, China
Brand Title:

OEM

Weight:

240KG

Dimension(L*W*H):

one hundred thirty*a hundred and twenty*80cm

Crucial Selling Factors:

Substantial Efficiency

Marketing and advertising Kind:

Regular Product

Machinery Test Report:

Offered

Movie outgoing-inspection:

Supplied

Guarantee of core components:

1 Year

Main Factors:

OEM

Right after Guarantee Support:

Video specialized support, On the web support

Applicable Industries:

Farms, OEM

Local Service Location:

None

Showroom Place:

United States, None

Local Support Location:

United States

Color:

Optional

Working Width:

one.2m 1.5m 1.8m

Tractor HP:

25-55HP

Operating depth:

20cm

disc measurement:

16 inch

Model:

weighty responsibility

Other Country:

CHINA

Offer Ability

Offer Potential:
a hundred Piece/Parts for every Week

Packaging & Supply

Packaging Information
Metal Crate
Port
NINGBO OR SHANGHAI
Direct Time
:
Amount(Parts) one – a hundred >100
Est. Time(days) 35 To be negotiated

On the web Customization

 

Product Data

 

Item Description

At Hangzhou Ever-Power Agricultural Equipment Co.Ltd we are specialist in top quality agri-parts like agricultural gearboxes, pto shafts, 3 details tractor attachments and skid steer and forklift implements at very competitive prices. Our selection of implements involves PTO shafts, gearboxes for agricultural equipment, post gap digger, auger,  tractor slashers, grader blades, spear , box scrapers,, ATV implements, agri- rippers, hydaulic cylinders, Telescopic Fork Mounted Jibs, Basic safety Cage etc. We have far more than 30 a long time production expertise.

 

EPG is a leader company in provider and investing performance, in the field of Gears.

Relevant Industries Farms
Condition New
Certification CE
Guarantee 1 12 months
Soon after-revenue Provider Offered Free spare components,Discipline maintenance and mend services,Online video complex assist,On the internet support
Use farm products
Location of Origin China
Manufacturer Title EP
Excess weight 240KG
Dimension(L*W*H) 130*120*80cm
China Zhejiang
Colour Optional
Working Width 1.2m 1.5m 1.8m
Tractor HP twenty five-55HP
Doing work depth 20cm
disc dimension 16 inch
Model heavy obligation
Other Nation CHINA

 

Item Exhibit

 

Item Screen

 

Agricultural machine parts 4ft 5ft 6ft  7ft 3 Level Hefty Disc Plow Tractor Plough 

Agricultural machine parts 4ft 5ft 6ft  7ft 3 Point Weighty Disc Plow Tractor Plough

Agricultural machine parts 4ft 5ft 6ft  7ft 3 Position Hefty Disc Plow Tractor Plough

Agricultural machine parts 4ft 5ft 6ft  7ft 3 Point Heavy Disc Plow Tractor Plough

 

 

 

 

 

 

faq

 

China manufacturer & factory supplier for Agricultural  in Thrissur India  machine parts 4ft 5ft 6ft  7ft 3 Point Large Disc Plow Tractor Plough With large high quality greatest price tag & services

China manufacturer & factory supplier for Agricultural  in Thrissur India  machine parts 4ft 5ft 6ft  7ft 3 Position Hefty Disc Plow Tractor Plough With higher quality very best value & support

China manufacturer & factory supplier for Agricultural  in Thrissur India  machine parts 4ft 5ft 6ft  7ft 3 Stage Weighty Disc Plow Tractor Plough With higher good quality best value & services

China manufacturer & factory supplier for Agricultural  in Thrissur India  machine parts 4ft 5ft 6ft  7ft 3 Level Hefty Disc Plow Tractor Plough With higher good quality very best price tag & service

China manufacturer & factory supplier for Agricultural  in Thrissur India  machine parts 4ft 5ft 6ft  7ft 3 Level Heavy Disc Plow Tractor Plough With higher good quality very best price & services

China manufacturer & factory supplier for Agricultural  in Thrissur India  machine parts 4ft 5ft 6ft  7ft 3 Position Large Disc Plow Tractor Plough With large good quality very best price tag & provider

China manufacturer & factory supplier for Agricultural  in Thrissur India  machine parts 4ft 5ft 6ft  7ft 3 Position Hefty Disc Plow Tractor Plough With higher quality best cost & services

Best China manufacturer & factory agricultural in Oklahoma City United States machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price

Best China manufacturer & factory agricultural  in Oklahoma City United States  machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price

The product properly displays environmental safety and power preserving.

Overview

Quick Details

Guarantee:

one.5 a long time

Relevant Industries:

Manufacturing Plant

Following Guarantee Service:

On-line assistance

Nearby Service Location:

None

Showroom Location:

Italy

Kind:

Shafts

Use:

Tractors

Place of Origin:Zhejiang, China
Brand Identify:

OEM

Neighborhood Service Location:

Italy

certificate:

CE

Material:

Metal

plastic guard:

YWBSYSBW tractor pto shaft

purpose:

transmit power tractor pto shaft

spline:

1 3/8 Z6/Z21 tractor pto shaft

Supply Capacity

Supply Capability:
ten thousand Piece/Pieces for every Month tractor pto shaft

Packaging & Shipping and delivery

Packaging Particulars
carton/iron crate tractor pto shaft
Port
ningbo or shanghai

Online Customization

Item Details

 

Merchandise Information

 

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft

PTO Shaft

The power consider-off (PTO) is a refined system, enabling implements to attract strength from the engine and transmit it to yet another application. It performs as a mechanical gearbox which can be mounted on the vehicle’s transmission.

The energy take-off shaft (PTO shaft) is a essential ingredient, made and manufactured for steady weighty-responsibility use. A great PTO shaft should be powerful sufficient to bear the torsion and shear stress and miniSHAFT Surface area High quality To purpose successfully and supply satisfactory lifestyle, oil seals must have a skinny oil film in between the seal lip and mating shaft journal. This condition, recognized as hydrodynamic lubrication, wants shaft surfaces that are not perfectly smooth but have microscopic pockets to support keep the lubricant film.–Driven (outer) yoke very same as generate yoke but is mounted on the employ. There are two varieties of shafts, domestic and metric, which are identifiable by their designs. Domestic are typically a single of 4 designs: spherical, sq., rectangle or splined. Metric are: bell, star or soccer formed. In both situation the main (entrance) shaft is the very same form as the secondary shaft, only even bigger so that the secondary shaft suits inside of. This permits a telescoping influence to get location when the employ is elevated on the 3 pt. or for the duration of a turning movement this sort of as a bailer. All shafts have to be sized ahead of use. Attach the implement to the 3 pt. and raise and support it. Attach the suitable conclude to the tractor and attempt to attach the other to the employ. If the shaft is way too lengthy trim 1 of the shafts with a hack observed and try it once more until finally it fits. This makes it possible for for the implement to be raised with no binding. The shafts need to overlap as much as authorized. Though plunge grinding is most widely employed to end seal journals, the resulting area is not best from this standpoint. Other ending approaches, this kind of as shot peening and liquid honing, provide a matte-variety finish which is usually more successful than a plungeground floor. Nonetheless, even these approaches typically leave raised, sharp corners that individual the ensuing microscopic indentations, yet again providing potential starting details for leaks.mize vibration.

Setforge, the forging subsidiary of Ever-Energy Group, manufactures chilly extruded PTO shafts for all types of agriculture cars. Our PTO shafts supply great dependability and longevity for the duration of every day use.

EP Group has been internationally recOur goods are marketing properly in Chinese marketplaces and some merchandise offered in worldwide marketplaces are properly gained by Chinese and foreign clientele at residence and overseas.ognized as a reliable world-wide supplier.  Our condition-of-the-artwork producing approach and seasoned engineers ensure the top-top quality of all Farinia parts.

  

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft agricultural machinery parts transmission cardan tractor clutch spline driveline shaft agricultural machinery parts transmission cardan tractor clutch spline driveline shaft agricultural machinery parts transmission cardan tractor clutch spline driveline shaft agricultural machinery parts transmission cardan tractor clutch spline driveline shaft

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft      

Right after Guarantee Provider Video clip technical support
Applicable Industries Producing Plant
Local Support Spot Italy
Showroom Area Italy
Warranty 1.5 a long time
Sort Shafts
Use Tractors
Area of Origin China
China Zhejiang
Brand name Title EPG
certification CE
Material Metallic
plastic guard YWBSYSBW tractor pto shaft
purpose transmit electrical power tractor pto shaft
spline 1 3/8 Z6/Z21 tractor pto shaft

Product Show

 

Merchandise Screen

 

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft
CAT 2 High definition Rapid Hit …

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft
fifteen” Hefty Obligation Ear …

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft
Agricultural Machi …

CompanyInfo

 

Company Profile

 

Ever-Power Team

 

EPG have large-tech machinery and take a look at products. We can generate entire world class substantial precision merchandise.

Certifications

 

Certifications

 

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft

Cargo & Payment

 

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft

Our Positive aspects

 

A: Your inquiry related to our goods or rates will be replied in 24 hours.
B: Security of your sales location, ideas of design and style and all your private info.
C: Best good quality and competitive price tag.
……

faq

 

FAQ

 

1) How can I location purchase?
A: You can get in touch with us by e mail about your get information, or location order on line.

 

2) How can I pay out you?
A: After you validate our PI, we will request you to pay. T/T (HSBC financial institution) and Paypal, Western Union are the most typical techniques we are making use of.

 

……

agricultural machinery parts transmission cardan tractor clutch spline driveline shaft

Best China manufacturer & factory agricultural  in Oklahoma City United States  machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price

Best China manufacturer & factory agricultural  in Oklahoma City United States  machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price

Best China manufacturer & factory agricultural  in Oklahoma City United States  machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price

Best China manufacturer & factory agricultural  in Oklahoma City United States  machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price

Best China manufacturer & factory agricultural  in Oklahoma City United States  machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price

Best China manufacturer & factory agricultural  in Oklahoma City United States  machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price

Best China manufacturer & factory agricultural  in Oklahoma City United States  machinery parts transmission cardan tractor clutch spline driveline shaft With high quality best price